Nokia 3620 - . Understand your phone

[ 8 ]

5

Replace the battery (

5

).

Align the golden contacts
of the battery with the
corresponding connectors
on the phone, and push the
opposite end of the battery
until it snaps into place.
Replace the cover.

Charge the battery

1

Connect the lead to the charger. You will hear it click into place.

2

Connect the charger to an ac
wall outlet.

3

Connect the lead from the charger
to the base of the phone. The battery
indicator bar starts scrolling. Note,
that you can use the phone
while charging.

4

When the battery is fully charged,
the bar stops scrolling. Disconnect
the charger from the phone and
then from the ac outlet. See also “Battery statements” on p. 158.

Note: Remove the battery only when the phone is switched off.

Switch the phone on or off

Press and hold the power key

located on top of the phone.

Warning: Do not switch on the
phone when wireless phone use
is prohibited or when it may
cause interference or danger.

5

[ 9 ]

General information

Antenna

Your phone has a built-in antenna (gray area in
picture). As with any other radio transmitting
device, do not touch the antenna unnecessarily
when the phone is switched on.

Contact with the antenna affects call quality
and may cause the phone to operate at a higher
power level than otherwise needed. Not touching
the antenna area during a phone call optimizes
the antenna performance and the talk time of
your phone.

PIN code

The PIN code is usually supplied with the SIM card. If you are requested to
enter a PIN code, Key in the code (displayed as ****) and press

OK

.

Security code

If you are requested to enter a security code, key in the security code
(displayed as *****) and press

OK

.

The factory setting for the security code is 12345. For more information
on the access codes, see “Security” on p. 44.

Time and date

Use the number keys 1–9 to key in the current time and then the date.
Press

OK

to accept the settings.

The Scroll key

Press the Scroll key on the top

,

bottom

, left

and right

(shown

with blue arrows 1 to 4) to move in the
Menu. Scroll to an application or a folder
and press the Scroll key in the middle

(shown with blue arrow 5) to open it.

1

2

3

4

5

[ 10 ]

For example:

1

To open an Options list, press

Options

. The small arrow at the bottom

of the display (

1

) indicates if the list

contains more items. The lighter the
arrow, the fewer the items left in the list.

2

To scroll down the Options list, press

. A small arrow to the right (

2

)

indicates a sublist. To open a sublist,
press .

To start an action, scroll to a command
and press

.

3

Press

to go to a tab (

3

), a new page,

or view in an application.

Make a call

1

In the standby mode, key in the phone number, including the area
code. If you make a mistake, press

to clear numbers.

2

Press

and wait for the answer.

3

Press

to finish the call (or to cancel the call attempt).

Copy from SIM card to phone memory

If you have stored names and phone numbers on a SIM card, you can copy
them to the phone memory.

1

Press

to open the main Menu.

2

Use the Scroll key to move to

Contacts

.

3

Press

to

open

Contacts

.

4

When you open

Contacts

for the first time, the phone asks you if you

want to copy all your contact data from the SIM card to the phone
memory. Press

OK

.

See also “Copy between SIM card and phone memory” on p. 50.

2

1

3

[ 11 ]

General information

Keyguard

Use the keyguard (keypad lock) to prevent the keys from being
accidentally pressed.

To lock: Press

and the * key. When the keys are locked,

appears on the display.

To unlock: Press

and the * key.

When the keyguard is on, press

to answer a call. During a call,

the phone can be operated normally.

Note: When Keyguard is on, calls to the emergency number
programmed into your phone (for example, 911) may be possible.
Key in the emergency number and press

. The number is

displayed after you have keyed in the last digit.

Shortcuts in the standby mode

•

Press

to open the main

Menu

.

•

Press

to open a list of the last dialed numbers. You can then press

to view received and missed calls lists.

•

Press

to

open

Contacts

.

•

To change the profile, press

briefly and select the profile.

•

Press the 1 key and

to call your voice mailbox. See “Call your

voice mailbox” on p. 22.

Shortcuts in editors

•

Press

to open a list of commands related to writing and editing

text. Press

to switch between predictive, traditional text input

and number mode (

Predictive text

→

Predictive text on

,

Alpha mode

,

or

Number mode

).

•

As you write, press the 1 key repeatedly to access different kinds of
special characters, or press the * key to open a list of special characters.

•

Press the 0 key to enter a space.

•

Use

to mark items. Press and hold

and at the same time, move

the Scroll key to mark text to be copied or erased.

[ 12 ]

Other shortcuts

In the main Menu, press and hold

to view all the applications that are

currently open. From this view, you can switch between applications by
scrolling to one and pressing

.

Standby mode

The indicators described are
shown when the phone is ready
for use, with no characters
keyed in. In this state, the phone
is in the standby mode.

A Shows the signal strength

of the cellular network at
your current location. The
higher the bar, the stronger
the signal. The antenna
symbol is replaced with the
GPRS symbol

when the

GPRS connection

has been

set to

When available

and a

connection is available in
the system or in the current cell. See “GPRS Packet data” on p. 38, and
“GPRS” on p. 43.

B Shows an analog or a digital clock. Also see settings for “Date and

time” on p. 43 and settings for Background image in “Standby mode”
on p. 34.

C Indicates which cellular system the phone is currently using.

D Shows the battery charge level. The higher the bar, the more charge

there is left in the battery.

E Navigation bar: shows the currently active profile. If the selected

profile is

Normal

, the current date is displayed instead of the profile

name. For further information, see “Navigation bar” on p. 17 and
“Profiles” on p. 106.

A

B

C

D

E

F

[ 13 ]

General information

F Shows the current shortcuts assigned for the selection keys

and .

Note: Your phone has a screen saver. If there are no actions for five
minutes, the display is cleared and a screen saver becomes visible. To
deactivate the screen saver, press any key. See “Display” on p. 34.

You can change the selection key shortcuts and the background image.
See the settings for “Standby mode” on p. 34.

Icons

Several icons may appear on the main screen while the phone is in the
standby mode. The icons that are displayed depend on whether they are
related to activity, data connections, or enhancements.

ACTIVITY INDICATORS
One or more of the following icons may be shown to indicate that an
activity has occurred:

Indicates that you have received new messages to the Inbox in
Messaging. If the indicator is blinking, the phone memory is low
and you must delete some data. For further information, see
“Memory low” on p. 173.

Indicates that you have received new e-mail.

Indicates that you have received one or more voice messages.
See “Call your voice mailbox” on p. 22.

Indicates that there are messages waiting to be sent in Outbox.
See “Outbox” on p. 97.

Indicates that

Ringing options

has been set to

Silent

and

Message alert tone

to

None

in the currently active profile.

See “Profiles” on p. 106.

Indicates that the phone’s keypad is locked.

Indicates that you have an active alarm. See “Clock” on p. 120.

Indicates that a Bluetooth connection is active. Note that, when
data is transmitted using a Bluetooth connection,

is shown.

[ 14 ]

DATA CONNECTION INDICATORS
When an application is establishing a data connection, one of the indicators
below blinks in the standby mode. When an indicator is shown continuously,
the connection is active.

Note: Check with your service provider for availability of
high-speed data calls.

ENHANCEMENT INDICATORS
The following icons indicate that an enhancement is connected to your phone:

Indicates that all calls to the phone are forwarded. Indicates
that all calls to the phone are forwarded to a voice mailbox. See
“Settings for call forwarding” on p. 25. If you have two phone
lines, the forward indicator for the first line is

and for the

second line

. See “Line in use (system service)” on p. 35.

Indicates that you can make calls using phone line 2 only
(system service). See “Line in use (system service)” on p. 35.

for a data call

for a high-speed data call

shown instead of the antenna symbol when there is an active
GPRS connection

for when the GPRS connection is put on hold during voice calls

for a fax call

for a Bluetooth connection

for an infrared connection

a headset is connected

a Loopset is connected